S. No. |
Services |
Techniques |
01 |
Remnant Life Assessment Under regulation 4 (C ) |
Recognized as “ Well Known Remanent Life Assessment organization” under Indian Boiler Regulation-1950 by Central Boiler Board.. |
. |
02 |
Material Testing Laboratory under regulation 4 ( C ) |
Recognized as “Material Testing Laboratory” under Indian boiler Regulation-1950. |
. |
03 |
Statutory Inspection of pressure vessels under rule 18,19, 33 & 2(P)
of SMPV rules |
Recognized as “ Competent Persons” & stage wise “Inspector” by Chief Controller of Explosives, under SMPV Rule 18, 19 &33 for testing,Inspection, Hydro Testing and Certification of Bullets & Horton Spheres. Stage wise Inspection during fabrication & Erection under rule 2(P).
. |
. |
04 |
Non-Destructive Testing
(NDT) |
- Visual & Geometrical Inspection
- Radiogrphy ( X-Ray & Gamma Ray)
- Ultrasonic Flaw detection, Thickness Measurement, TOFD, Phased Array
- Corrosion mapping of Boiler Tubes & Scanning
- Bottom Plate of Storage Tanks
- Magnetic Particle Testing
- Liquid Penetrant Test
- Borosonic Testing of Rotor Shaft bore
- Video Fibroscopic Inspection
- In-situ Oxide Scale measurement
- Eddy Current test of turbine blades, condenser tubes & Heat
- Creep Rupture Test
|
. |
05 |
Destructive Testing
|
- Creep Rupture Test
- Tensile test (high temperature & Room temperature)
- Bend Test
- Flattening test
- Impact Test
- FATT Analysis, Fracture toughness. Temper embrittelment.
- Source identification of stress corrosion, hydrogen embrittlement, Crevices & Pitting Corrosion.
- Hardness Test on various measuring scale
|
. |
06 |
Third Party Inspection
|
Level III Services, Stage wise inspection during procurement of materials,
Fabrication & Erection. Forging, casting & finished goods. Inspection of
structural steels, welding performance, welder qualification, ERW pipes,
Seamless pipes, Boiler tubes, Condenser & Heat exchanger Tubes |
. |
07 |
Metallography & Failure
Analysis |
Investigation of component failures during service by application of
fracture mechanics, In-situ metallography & study of material
degradation by conducting all the relevant Tests.
|
. |
08 |
Chemical Test
|
- Wet analysis
- Positive Material Identification. (PMI)
- Spectro Analysis
|
. |
09 |
Miscellaneous services
|
- Stress Analysis of high temperature and pressure piping including
hangers & supports.
- Stress Relieving of Weld Joints.
- Natural Frequency Test of Turbine Blades.
|
. |
10 |
Electrical Testing & Audit
|
- All the relevant tests of generator rotors & Stators, HT Motors &
Transformers,
- Steam Path Audit of India
Electrical
- Audit of LPG Plants
|
. |
11 |
Training
|
- All fields of NDT, Certification course as per ASNT-SNT-TC-IA, for LEVEL-I&II
- BARC RT-1 Courses
|
. |
12
|
|
|
